 |
|
How to add, change, or delete a Master or User codes:
Watch out for:
- Are you taking too long between keystrokes? Each of these sequences must be executed with no pauses between keystrokes.
- Do you have the right Authority? Only a Master Code can be used to assign, change, or delete user codes.
- All codes must be 4-digits.
- The keypad gives no confirmation of prompts until all keystokes are completed.
- Vista 10P has 13 available user positions (03-15) beside the Master Code.
- Vista 20P has 45 additional user positions (03-47) beside the Master Code.
- Lynx (wireless) has 4 additional user positions (03-06) beside the Master Code.
Changing an Existing Master code (Master changing itself)
- At the keypad, enter Master Code + 8 + 02 + New Master Code + New Master Code
- This will change the Master Code. The new code is keyed twice for verification.
- You will get a single beep to verify the entry was accepted.
- For example, if the Master Code is 1234 and wants to change itself to 5678,
- Key the following: 1234 8 02 5678 5678
Back to top
Programming a Secondary User Code
- At the keypad, enter master Code + 8 + (user position) + 4-digit User Code.
- You will get a singe beep to verify the entry was accepted.
- The user position will be a 2-digit entry of 03, 04, 05, etc...
- For example, if the Master Code is 1234 and wants to add a code of 5678 as user #03,
- Key the following: 1234 8 03 5678
Back to top
Deleting a Secondary User Code
- At the keypad, enter Master Code + 8 + (user position) + # + 0
- You will get a single beep to verify the entry was accepted.
- The user position will be a 2-digit entry of 03, 04, 05, etc...
- For example, if the Master Code is 1234 and wants to delete user #03,
- Key the following: 1234 8 03 # 0
Back to top
For additional assistance or questions, please do not hesitate to contact our office. We are always happy to help!
|
|
