Keypad Programming

6150 Keypad

How to add, change, or delete a Master or User codes:


—-
Things to watch out for:

  • Are you taking too long between keystrokes? Each of these sequences must be executed with no pauses between keystrokes.
  • Do you have the right Authority? Only a Master Code can be used to assign, change, or delete user codes.
  • All codes must be 4-digits.
  • The keypad gives no confirmation of prompts until all keystrokes are completed.
  • Vista 10P has 13 available user positions (03-14) besides the Master Code.
  • Vista 20P has 45 additional user positions (03-46) besides the Master Code.
  • Lynx (wireless) has 4 additional user positions (03-06) besides the Master Code.

—-
—-

Changing an Existing Master Code

  1. At the keypad, enter Master Code + 8 + 02 + New Master Code + New Master Code.

    2. (This will change the Master Code. The new code is keyed twice for verification.)

  2. You will get a single beep to verify the entry was accepted.

    3. For example, if the Master Code is 1234 and you want to change it to 5678,
    key the following: 1234 8 02 5678 5678

Back to top
—-
—-

Programming a Secondary User Code

    Note: The user position will be a 2-digit entry of 03, 04, 05, etc…

  1. At the keypad, enter Master Code + 8 + (user position) + 4-digit User Code.
  2. You will get a singe beep to verify the entry was accepted.

    3. For example, if the Master Code is 1234 and you want to add a code of 5678 for user #03,
    key the following: 1234 8 03 5678

Back to top
—-
—-

Deleting a Secondary User Code

    Note: The user position will be a 2-digit entry of 03, 04, 05, etc…

  1. At the keypad, enter Master Code + 8 + (user position) + # + 0.
  2. You will get a single beep to verify the entry was accepted.

    3. For example, if the Master Code is 1234 and you want to delete user #03,
    key the following: 1234 8 03 # 0

Back to top

—-
—-
For additional assistance or questions, please do not hesitate to contact our office. We are always happy to help!